NEMA 210 frame three-phase general purpose AC motors have a standard 1-3/8" diameter, 3-3/8" length shaft whose center is 5-1/4" above the mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 213TCV. The letter “T” specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, “C” indicates that the motor can be face mounted, and “V” indicates that the motor can be vertically mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
Technical Specs
- ItemGeneral Purpose Motor
- Motor ApplicationGeneral Application
- PhaseThree
- Motor Design3-Phase
- HP7 1/2
- Nameplate RPM1,770
- No. of Speeds1
- Voltage230/460V AC
- Full Load Amps19/9.5
- Frame213T
- Usable @ 208VYes
- Usable @ 200VNo
- Hz60
- Motor Service Factor1.15
- Max. Ambient Temp.40 Degrees C
- Motor Thermal ProtectionNone
- Duty CycleContinuous
- Ins. ClassF
- NEMA DesignA
- Motor Enclosure DesignTotally Enclosed Fan-Cooled
- Motor Shaft RotationCW/CCW
- Motor Mounting TypeRigid Base
- Motor Mounting PositionAll Angle
- Inverter RatedYes
- Motor Shaft DesignKeyed
- Motor Frame MaterialSteel
- Shaft Dia.1 3/8 in
- Shaft Length3 3/8 in
- Motor BearingsBall
- Length Less Shaft15 5/8 in
- Overall Length19 in
- Weight122 lb
- Motor Efficiency GroupNEMA Premium Efficient
- Nominal Efficiency91.7 %
- CC NumberCC031A
- StandardsCSA, CSA EEV, UR
- Manufacturers Warranty Length3 yr
- Green Certification or Other RecognitionNEMA Premium(R) Rated